lsattr -El hdisk2 | grep "hcheck_"
lspv | awk '{print "chdev -l " $1 " -a hcheck_interval=60 -P " }' | sh -x
--------------------------------------------------------------------
Scenario: Configuring Multi-Path I/O for AIX client logical partitions
Multi-Path I/O (MPIO) helps provide increased availability of virtual SCSI resources by providing redundant paths to the resource. This topic describes how to set up Multi-Path I/O for AIX® client logical partitions.
In order to provide MPIO to AIX client logical partitions, you must have two Virtual I/O Server logical partitions configured on your system. This procedure assumes that the disks are already allocated to both the Virtual I/O Server logical partitions involved in this configuration.
To configure MPIO, follow these steps. In this scenario, hdisk5 in the first Virtual I/O Server logical partition, and hdisk7 in the second Virtual I/O Server logical partition, are used in the configuration.
The following figure shows the configuration that will be completed during this scenario.

Using the preceding figure as a guide, follow these steps:
'IBM Power' 카테고리의 다른 글
Configuring a Shared Ethernet Adapter (0) | 2013.04.22 |
---|---|
[펌] How to work with VLAN using VIOS (0) | 2013.04.22 |
lsof on aix (0) | 2012.12.20 |
POWER7 Virtualization Best Practice Guide version 2.0 (0) | 2012.12.13 |
Resource Affinity 문제 해결을 위한 SPPL 설정... (0) | 2012.12.13 |